英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
024565查看　024565　在百度字典中的解释百度英翻中〔查看〕
024565查看　024565　在Google字典中的解释Google英翻中〔查看〕
024565查看　024565　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • What DID a 2x4 Cost in 2019? - LumberJocks Woodworking Forum
    You're certainly not in the same boat While I can't remeber exactly what various sizes of 2x* lumber cost in '19 I do remember buying maybe a couple dozen 2×4 at some unmemorable price and a dozen or so sheets of 7 16" x 4' x 8' OSB for $8 95 sheet in 3 19 for building garage shelving
  • The Price of Hard Maple | LumberJocks Woodworking Forum
    My nearest hardwood supplier is now charging $8 bf for hard maple rough cut, which sounds high to me, especially considering here in NY it’s the state tree! Cherry and Honduran Mahogany are cheaper Is anyone else noticing this? Does anyone know of a cheaper option in upstate NY? I was
  • What is the advantages of using 2x6 or 2x10 over 2x4 for. . .
    I would also use Florida rated windows Not only does the inner film help with safety, it is an additional thermal break and works almost as good as a triple pane Price no object, I would also use the cement roof tiles Pay once, not every 30 years Having been on basements, crawl space and slabs, I would go insulated slab again
  • Ripping a 2x4 down to roughly a 2x3?? - LumberJocks Woodworking Forum
    Not all of these 2X4's were like that Just the one A friend, an experienced WW, told me too-rapid kiln drying was probably responsible Although the 2X4 I had selected was straight as a die before my cut, the kerf released the counterbalancing inner tensions and resulted in a warp on both sides of the cut
  • WORKBENCH TOP THICKNESS | Page 2 - LumberJocks Woodworking Forum
    I had to buy some 2x4's for cross members I used the left over pieces of plywood to make shelves on top of the 2x4 cross members I made it so that the hardwood wrap around the plywood is flush with the front of the 4x4's and 2x4's on the long sides of the bench The concrete of my garage floor is fairly flat, but not perfect
  • Pink studs at Lowes | LumberJocks Woodworking Forum
    Maybe I'm not a good internet sleuth but I can't seem to find any information on the pink studs at lowes Is there a reason they're cheap ? And is the pink a caustic chemical like pressure treated wood ?
  • Need Help with Pocket Hole Joints in 2x4
    Hello, I am a beginning woodworker and am starting my first project I am building a salt water mixing stand out of 2×4s and plywood The structure will be 2×4s and the shelves will be plywood I have cut my 2×4s and drilled all of the pocket holes I then primed and painted Now today I
  • Kitchen cabinet toe kick | LumberJocks Woodworking Forum
    Decided to go with plywood,supplier had some c-2? birch or maple ($42 per sheet) Same price as 3 4 sheathing Should be fine for cabinet toe kick I considered using 2x material because of the thickness,easy to attach to the box In the end I like the consistancy of plywood,and not having to joint and plane a pc of 2x
  • What Length Screws To Attach French Cleat To Wall For. . .
    Here is how I do it A 2x4 is 3 5" thick as a wall stud So 3 4" for the cleat, plus 3" for the stud I leave 1 2" of the stud not screwed so the fibers of the wood are closed at the screw tip, assuming the stud is pine or fur Pre-drill the cleat 1 16th smaller than the screw shank for bite on the wood
  • Woods that stink when you cut or sand them.
    I've noticed that different woods have different smells when cut or sanded One wood that has a very weird odor is a very blonde and dense wood with hardly any grain lines What kind of wood could it be?





中文字典-英文字典  2005-2009