英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
acutes查看　acutes　在百度字典中的解释百度英翻中〔查看〕
acutes查看　acutes　在Google字典中的解释Google英翻中〔查看〕
acutes查看　acutes　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • eCFR :: 24 CFR 3280. 808 -- Wiring methods and materials.
    (d) Nonmetallic sheathed cable shall be secured by staples, straps, or similar fittings so designed and installed as not to injure any cable Cable shall be secured in place at intervals not exceeding 4 1⁄2 feet and within 12 inches from every cabinet, box or fitting
  • Nonmetallic Extensions | UpCodes
    Nonmetallic surface extensions must be firmly secured at intervals of no more than 200 mm (8 inches), with a maximum of 300 mm (12 inches) to the first fastening when connected via an attachment plug At least one fastening is required between adjacent outlets
  • Securing and Supporting NM Cable: A Guide to NEC Compliance
    According to NEC 334 30, installers must secure and support NM cable at intervals not exceeding 4 1 2 feet and within 12 inches of every cable entry into enclosures such as boxes, cabinets, or fittings You may staple cables closer together than this, but not further apart
  • ARTICLE 382 Nonmetallic Extensions - National Electrical Code® - 1Library
    Nonmetallic surface exten- sions shall be secured in place by approved means at intervals not exceeding 200 mm (8 in ), with an allowance for 300 mm (12 in ) to the first fastening where the connection to the supplying outlet is by means of an attachment plug
  • 334. 30 Securing and Supporting. - ElectricalLicenseRenewal. com
    Securing and supporting requirements for NM cable are found in Section 334 30 The general rule for NM cable is to secure the cable within 12 inches of the box and every 4 5 feet thereafter
  • National Electrical Code Quiz, Article 382 Answers - Codebookcity
    You can use it from an existing outlet on a 15A or 20A branch circuit, and only if it's exposed (or concealed as permitted in 382 15), in a dry location, and in a residential or office building no more than three floors above grade [382 10]
  • Section 334. 30. Securing and Supporting. Nonmetallic-sheathed cable . . .
    Nonmetallic-sheathed cable must be supported and secured by insulated (or, in a single-family dwelling, even by non-insulated) staples, cable ties, straps, hangers, or similar fittings, designed and installed so as not to damage the cable, at intervals not exceeding 4½ feet (1 4m) and within 12 inches (300 mm) of every outlet box, junction box
  • NEC Questions and Answers, Based on the 2017 NEC - October 2017 - Mike Holt
    (3) Not more than 3 ft from the last point where it's securely fastened to provide flexibility for equipment that requires movement after installation, or to connect equipment where flexibility is necessary to minimize the transmission of vibration from the equipment
  • ROMEX Cable Support Requirements (2024) – CircuitIQ. ai
    Article 334-30 in the National Electrical Code provides guidance on the securement and support of NM cable The article specifies that type NM, NMC, and NM-B cables must be supported at intervals not exceeding 4 1 2 feet and within 12 inches of every cable entry into enclosures such as junction boxes, outlet boxes, or cabinets
  • When Are Nonmetallic Extensions Allowed? - Engineer Fix
    Proper physical installation of nonmetallic sheathed cable is necessary to maintain its safety rating and ensure long-term reliability The cable must be secured and supported by approved staples, straps, or fittings at intervals no greater than $4\frac {1} {2}$ feet along its run





中文字典-英文字典  2005-2009