英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
fluttering查看　fluttering　在百度字典中的解释百度英翻中〔查看〕
fluttering查看　fluttering　在Google字典中的解释Google英翻中〔查看〕
fluttering查看　fluttering　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Fluttering - NAWCC Forums
    In reading posts on the topic, the explanation "lowering the fork increases fluttering, because the resistance to turning the fork is reduced and that makes it easier for the escape teeth to bounce off the pallets, followed by fluttering " is a bit of a head scratcher I don't know that it is an issue of resistance
  • What is fluttering? - NAWCC Forums
    If it does not happen while the clock is running on its own, it's not a problem If it does happen on it's own, the fork has to be raised a little bit If the clock is only gaining 5 minutes a day or so, it's probably not fluttering You would see hours rather than minutes, and you would hear it while it's fluttering
  • Anniversary Clock Anchor Flutter - NAWCC Forums
    You want it set right at the edge of fluttering Do note that it is normal for these clocks to flutter sometimes while advancing the minute hand but should stop as soon as the pressure is off the minute hand If someone has mess with the pallets or the escapement depth, you have a lot to learn about how these are adjusted Blind fiddling,
  • 400 day anniversary clock - NAWCC Forums
    Doc, thanks for the update My experience has been that the fork position on the 6789 spring diagrams is a little too high As you work on getting your clock to run you may have to raise the fork a little to avoid fluttering and to increase pendulum rotation but you will have plenty of room to do that
  • Kieninger-Obergfell anniversary clock - NAWCC Forums
    So, when I have to change the minute hand position, I either do it quickly when the pendulum comes to a stop on it's rotation (if I only need to move a few minutes) or carefully catch the pendulum with a finger at the end of the rotation (in order to move many minutes) This locks the escape wheel and prevents the fluttering Kurt
  • My 400-Day Schatz Stops after 10 minutes - NAWCC Forums
    If the clock is fluttering, you're not going to get impulse to keep the pendulum rotating Raise your fork a bit until the flutter stops, and try again You have to have impulse through the escapement and it sounds to me that you are not getting it The pendulum needs a "push" on every rotation to keep running
  • Koma london coach 400 day A. C running soooooo fast!
    This tells fluttering is not the problem so altering the fork won't fix it and it is way beyond what you can do with the adjuster It is either the suspension spring or the pendulum I've only been at this for a year but have 16 clocks running and I would first assume the suspension spring is too thick
  • JUNGHANS SWINGER- TIME ADJUSTMENT - NAWCC Forums
    3) The pin pallet escapement may be "fluttering" This can be adjusted but is tedious, you have to remove the movement to do it The bridge that holds the pin pallet arbor has oblong holes at each end allowing vertical adjustment to set lock and drop
  • 400 day clock running so fast - NAWCC Forums
    No fluttering, fork to be adjusted high enough to prevent this and also maintain good overswing Clock being in beat with equal and adequate overswing in each direction of rotation When these conditions are met the clock will run well regardless of total pendulum rotation
  • Schatz 400 day wont run - NAWCC Forums
    Ideally, the fork should be lowered until the escapement flutters, then move it up 1-2mm until the fluttering stops Kurt Working on anniversary clocks is the definition of insanity doing the same thing over and over but expecting different results!





中文字典-英文字典  2005-2009