英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
honora查看　honora　在百度字典中的解释百度英翻中〔查看〕
honora查看　honora　在Google字典中的解释Google英翻中〔查看〕
honora查看　honora　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • P1S + AMS: Clogged Extruder after Priming (after changed filament)
    Hi all! Hope you’re all well! Bought my P1S a few months ago and I’ve gotten my AMS recently and was printing fine for a few days Last print, though, I’ve encountered an extruder clog where I can’t seem to find similar cases online So, let me present it here Issue: Extruder clog When: After prime tower wipe So, the filament change, purge and prime tower wipe was successful When it
  • Extruder Clogged? - Troubleshooting - Bambu Lab Community Forum
    I keep getting extruder clogged on my P1s… I took it off and it doesnt appear to be clogged I cleaned it throughly The hotend seems okay as well I also replaced the hotend since I had a spear to see if that fixes it but it does not When I took apart the extruder, I tried to manually feed filament into the extruder and turn the gear myself, but I cannot Is it suppose to feed through the
  • HELP! How to unclog extruder while printing? - Troubleshooting - Bambu . . .
    20 hours into a 23 hour print and “extruder clog” message pops up, confirmed by green light on extruder feedback on the Device tab… I know how to fix jams clogs, but how does one do it without losing the print job???!
  • P1S Clog error message, but there is no clog - Troubleshooting - Bambu . . .
    Hardened Steel Extruder Gear Assembly hardened-steel-extruder-gear-assembly After all of this I still had the same issue, but having no hair to pull out did a more descriptive search and hit upon this article After removing the 4-port AMS filament buffer, I cleaned the magnet and spring and success!
  • Failed to pull out the filament from extruder - Troubleshooting - Bambu . . .
    I will then pull out the PTFE tube from the extruder and push in 1 filament to ensure it can reach the AMS Unplug the PTFE tube at the back of AMS unscrew the 2 screws at the AMS, remove the AMS holder to expose the wiring unplug the 2 wires and make sure the AMS motor filament feeding is clear
  • Manual for unclogging the P1S - Bambu Lab P Series - Bambu Lab . . .
    This happened to me recently on a P1S The video is accurate Heat it up and nudge it with the extruder Doesn’t work then push filament by hand Doesn’t work then pull the hot end, heat it up and really push it Only thing he didn’t mention is how to use the needle supplied with the kit How to extrude? Just look that up in the wiki
  • Bambu P1S Yet another clogging topic - Troubleshooting - Bambu Lab . . .
    My situation looks something like this I have the P1S machine and print with original Bambu PLA Basic filaments Nearly 660 hours printed on this machine And one day I started to get clogs The problem is after cleaning the clog it’s again clogged The main mystery is that nothing was changed in the operational environment After the first event of clogging, now I’m getting clogs all the
  • P1S keeps clogging - Bambu Lab Community Forum
    Hi all, In the past month or so my P1S keeps clogging the filament… Tried different rolls makes, opened the extruder, cleaned the gears… A new nozzle, works for like month tops and it starts to clog No matter what I do, it just keeps clogging; literally makes me throw it out the window 🤬 🤬 🤬 Top cover has been removed, so cannot blame the heat Any advices?
  • Extruder Clog continuously problem - Troubleshooting - Bambu Lab . . .
    For the last two days I can’t print anything While it starts to print normally, suddenly a filament sticks inside the extruder and clogs I have changed both extruder and hotend I have also done calibration I think something is blocking the thread I wonder if the AMS is to blame on the power supply
  • Can not solve this clog. . . What is happening? - Bambu Lab P Series . . .
    At the same time, the extruder is clogged, so I have now completely dismantled it ten times and cleaned the hotend with a cold pull After cleaning, the gears are free again and can be turned easily Nevertheless, everything is blocked again the next time I print I have now replaced the entire hotend and installed a new one





中文字典-英文字典  2005-2009