英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
unobservedly查看　unobservedly　在百度字典中的解释百度英翻中〔查看〕
unobservedly查看　unobservedly　在Google字典中的解释Google英翻中〔查看〕
unobservedly查看　unobservedly　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Stihl Ignition Module Air Gap. . . - Arborist, Chainsaw Tree Work Forum
    Next, the shop manual says to remove the setting gage, and measure the resulting air gap which is 0 008" - 0 012" Sounds easy enough Here's the problem, the stihl setting gage seems to set the air gap too tight, like 0 004" measured between the ignition module arms and the flywheel magnets using a feeler gage set
  • AC Delco R45TS gap out of the box - Team Chevelle
    Test engine was a 253 Cu in V6 Stock ign, 045 plug gap, it made 168 hp With Platinum plugs, same 045 gap, it made 171 hp Split Fire plugs, same 171 HP With surface gap plugs, 172 5 hp Then Jacobs installed one of his ign systems With same stock plugs, same 045 gap, hp increased to 180 5 With three specialty plugs, hp dropped 1 5-2hp
  • Real world HEI spark plug gaps - Team Chevelle
    If yu still see a specification for an incorrect giant spark plug gap for an HEi for any of the HEI's, DROP THE GAP DOWN TO THE PROPER SPECIFICATION OF 045 MAXIMUM All this was done in the divisions that designed the HEI, here in America, NOT some place in the middle of the Gobi Desert, nor Antarctica, nor the moon, but, here in The United
  • Performer RPM Airgap?? - Team Chevelle
    so unless your full blown competition and want the extra expense the Edelbrock RPM Air Gap is a solid choice The Jegs manifold fell short in HP and torque in the test 1970 El Camino 383 Stroker, 10 42 to 1 Compression, 62CC aluminum heads 510 520 lift 230 236 duration roller cam, 2800 stall converter 3 73 gears with 28” tall tires
  • Torque Converter to Flywheel Clearance - Team Chevelle
    TH350 Stock converter to a BluePrint 350 w BP Flexplate (new) I have done the research and just wanted to confirm what I have read online with the knowledge base here When I go to bolt the TC and the flywheel together, there is a gap of 210 as measured with feeler gauges (see pic below)
  • Have anyone filed piston oil-rings? - Team Chevelle
    The oil rings are way bigger than the bore size I am building a 454 with 60 overbore (468) and now I am at the point of filing rings The rings are Mahle 4 310 + 005 file fit rings and the instructions states minimum gap for the oil ring to be 0015 The top and bottom rings are pretty
  • plug gap - Team Camaro Tech
    With a larger gap, the higher the voltage, to a certain extent, and shorter spark time The ignition coil will generate a spark for jumping the gap, but, its the resistance of the gap including the ambient temp, pressure, and turbulence of the combustion chamber determines the intensity of spark Run an experiment, do stock gap, record results
  • Th350 - Flexplate to Torque Conv. question other issues.
    You can use washers to fill the gap from 1 2 inch to 3 16 inch If you go to a fastener specialty store, they may have a scale that you can select those washers weighing the same to keep the balance Try to get NAS620 or AN960 washers rather than MS washers And longer bolts -----Everett "An Engineer's mind is never idle "
  • Homelite 330 air gap | Arborist, Chainsaw Tree Work Forum
    Set the gap where the magnets meet the coil, the rest of the flywheel gap does not matter as long as the flywheel is not contacting the coil laminations If you are not getting spark at 010 gap then its not the air gap, the factory air gap is 015, more likely the coil module has gone bad but check that the shut off wire is not grounded
  • Homelite 150 Auto-points adjustment - Arborist, Chainsaw Tree Work Forum
    I do have a parts saw with a set of points that are in one piece, this assembly allows easy point gap adjustment Unfortunately the rub block brass pivot pin is integral to the point assembly My saw’s steel rub block pivot pin is pressed into the engine block So these two assemblies can’t be interchanged unless I can somehow get the steel





中文字典-英文字典  2005-2009