英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

cohesion    音标拼音: [koh'iʒən]
n. 结合,凝聚,内聚

结合,凝聚,内聚

cohesion
内聚性

cohesion
n 1: the state of cohering or sticking together [synonym:
{coherence}, {coherency}, {cohesion}, {cohesiveness}] [ant:
{incoherence}, {incoherency}]
2: (botany) the process in some plants of parts growing together
that are usually separate (such as petals)
3: (physics) the intermolecular force that holds together the
molecules in a solid or liquid

Cohesion \Co*he"sion\, n. [Cf. F. coh['e]sion. See {Cohere}.]
1. The act or state of sticking together; close union.
[1913 Webster]

2. (Physics) That from of attraction by which the particles
of a body are united throughout the mass, whether like or
unlike; -- distinguished from adhesion, which unites
bodies by their adjacent surfaces.
[1913 Webster]

Solids and fluids differ in the degree of cohesion,
which, being increased, turns a fluid into a solid.
--Arbuthnot.
[1913 Webster]

3. Logical agreement and dependence; as, the cohesion of
ideas. --Locke.
[1913 Webster]


请选择你想看的字典辞典：
单词字典翻译
cohesion查看　cohesion　在百度字典中的解释百度英翻中〔查看〕
cohesion查看　cohesion　在Google字典中的解释Google英翻中〔查看〕
cohesion查看　cohesion　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Cant get full power from LPSU - Board Configuration and Setup . . .
    Problem Question: Since I’ve upgraded to the Cohesion board (and added an ammeter) I can’t get more than 10ma from my power supply I thought the stock one was just garbage, so I bought a 50W Cloudray MYJG LPSU (110v) and still can’t get full power Originally, I thought my tube was bad even with low hours on it
  • Laser diode 5v ttl config - Board Configuration and Setup - Cohesion3D . . .
    Machine: Eleksmaker, with an upgraded laser from ebay “PWM TTL 450nm 5W Blue Laser Engraving Module Focusable Etcher Laser Gift Goggles” 5 TTL signal input: 0V ON 5V OFF 6 Frequency for TTL control: 0-30KHz Board: Cohesion3d Firmware: Smoothie Problem Question: My laser uses a 5v TTL so I’m using that pin on the cohesion board I was trying to use T2laser to shoot the laser test the
  • Laser and lightburn freeze when i send cut file to laser
    k40 m2nano cohesion 3d “I have a new board and I’m using whatever it came with” is also a great answer!_ i send cut file to board it starts then quickly stops and lightburn freezes i have to restart lightburn to get it to home the laser i bought this board two years ago and just got around to installing it if i turn laser power off on the panel it will run the cut file to the end and
  • Everything is working in reverse - Board Configuration and Setup . . .
    To make the laser head move to the left I have to click on the right of the grid in the light burn software to move it down I have to click on the top of the grid if I get the laser head to the centre of the work space and have put some text in for the head to cut or engrave the head moves very fast the laser does not fire but it does seam to
  • New Cohesion board, K40 laser only fires on test switch, not on panel . . .
    Machine: K40, Came with a HT XC ON 9 (very similar, if not identical to the HT master) Used HT master install instructions for Cohesion board Board: Laserboard Firmware: Smoothie…that’s what it said on it I don’t know what smoothie is But it works 🙂 Problem Question: I am NOT an expert with wiring etc I’ve tried looking through some similar threads and could not understand
  • Controller conversion - Pre-Sales Questions - Cohesion3D Community
    Chinese 600x400 6040 XM-4060 Lihuiyu Studio Labs xb super B1 Board: replace this text with what board you have (LaserBoard, Mini, or Remix) Firmware: _Dont know the firmware whatever came with it Problem Question: will the Cohesion controller board work with this laser and what all needs to be purchased to make it work? Did you provide those pictures? We need pictures to understand your setup!
  • Will cohesion 3d work in this engraver? - Pre-Sales Questions . . .
    Hi all, I am new to laser engraving and traded for this machine It is older but only supposed to have 30 hours on it I would like to upgrade the board so i could run lightburn The newlydraw 1 5 software is driving me insane and does not let me do what i want The only number i can get off the board is V8 1 I have tried to attach photos but not allowed
  • Cohesion board - laser not firing after two weeks of holiday
    Hi All, I switched to cohesion board in July, it has worked fine with my machine so far I tried to cut something on my laser today after two weeks of holiday - the machine worked two weeks ago without problem, only to find out that I can’t First thing - is my tube or psu gone? Checked that and when I take out main connector - that hooks up the board with psu - I can fire the laser using
  • Homing alarm not clearing - Board Configuration and Setup - Cohesion3D . . .
    Machine: Preenex K40 laser Board: cohesion3D laserboard Firmware: _Smoothie …I have a new board the Cohesion laserboard Problem Question: I installed my board and everything was running smoothly, used it for about a week no problem, then nothing The only light was the vmot light I un plugged everything reinstalled my nano board everything works fine, with Inkscape an k40 whisper I then
  • Help wanted with motorised Z table - Board Configuration and Setup . . .
    Machine: K40 Board: Cohesion 3D Firmware: _Smoothie I am currently awaiting delivery of a motorised Z table, and have been playing with the settings using a spare stepper motor What I want to do is use the up and down buttons on the move tab to move the table and also set a microswitch to home the table to the correct focus position (Z=0) At the moment pressing the Z up button turns the motor





中文字典-英文字典  2005-2009